Monohydrate (9CI)-manufacture,factory,supplier from China

(Total 24 Products for Monohydrate (9CI))
Products Description of Sodium Perborate Monohydrate CAS#10332-33-9As a highly efficient and stable oxygen-based bleach, sodium perborate monohydrate is widely used in laundry detergents, color bleaching powders, and dishwashing agents.
Contate agora
Products Description of Citric Acid Monohydrate CAS#5949-29-1 Citric acid monohydrate is an organic compound with the chemical formula C6H10O8 and a molecular weight of 210.139.
Contate agora
Products Description of Adenosine5'-(tetrahydrogen triphosphate), disodiuM salt, trihydrate (9CI) CAS#51963-61-2 This product is white crystal or off-white powder, odorless, slightly sour, and hygroscopic. It is easily soluble in water and very slightly soluble in ethanol, ether, chloroform and benzene. It is relatively stable in alkaline solutions and easily decomposed in acidic and neutral solutions.
Contate agora
roducts Description of Sodium Monohydrate CAS#10039-56-2Sodium hypophosphite, also known as "sodium dihydrogen hypophosphite" and "sodium hypophosphite", has the chemical formula NaH2PO2. It is a colorless crystal or a pearly crystal or a granular powder. It is soluble in water, alcohol and glycerin, but insoluble in ether. It is easy to deliquesce. It is relatively stable when stored in a dry state. When heated above 200°C, it will decompose rapidly, releasing phosphine, a toxic gas that can self-ignite.
Contate agora
Products Description of L-Histidine hydrochloride monohydrate CAS#5934-29-2White crystals or crystalline powder. Odorless. Slightly sour and bitter. Melts and decomposes at about 250% (after drying). Stable in nature. Aqueous solution is acidic (pH 3.5-4.5). Easily soluble in water (39g/100ml, 24℃), much more solubility in water than L-histidine. Insoluble in ethanol and ether. It is a quasi-essential amino acid (essential amino acid for infants and young children), and is synthesized slowly in the human body. Lack of it can lead to developmental delay, eczema and other symptoms.
Contate agora
Products Description of Naphthalene-2-sulfonic acid CAS#120-18-3White to slightly brown leaf-shaped crystals. Melting point 91℃ (anhydrous), 83℃ (trihydrate), 124℃ (monohydrate). Soluble in water, alcohol and ether.
Contate agora
Products Description of O-Phenanthroline CAS#66-71-71,10-Phenanthroline monohydrate is an organic intermediate, white crystalline powder. It is a redox indicator, a reagent for the determination of ferrous iron, palladium, vanadium, copper, and iron.Monohydrate is a white crystalline powder.
Contate agora
Products Description of ISOQUINOLINE-3-CARBOXYLIC ACID CAS#203626-75-9 Isoquinoline-3-carboxylic acid, monohydrate is an organic compound.Isoquinoline-3-carboxylic acid Chemical PropertiesMelting point 166-168 °C(lit.)storage temp. 2-8°Cform powder to crystalcolor White to Light yellow to Light orangeSafety InformationHazard Codes XiRisk Statements 36/37/38Safety Statements 26-37/39WGK Germany 3Product Application of Isoquinoline-3-carboxylic acidIsoquinoline-3-carboxylic acid, monohydrate is often used as an intermediate.Factory
Contate agora
Products Description of N-LAUROYL-L-GLUTAMIC ACID CAS#3397-65-7N-(1-oxododecyl)-L-glutamic acid (9CI) is a chemical whose English name is L-Glutamicacid, N-(1-oxododecyl)-.N-LAUROYL-L-GLUTAMIC ACID Chemical PropertiesMelting point 95-96 °CBoiling point 543.6±40.0 °C(Predicted)density 1.081±0.06 g/cm3(Predicted)storage temp. Sealed in dry,Room Temperaturesolubility Aqueous Base (Slightly), Chloroform (Slightly)form Solidpka3.46±0.10(Predicted)color White to Off-WhiteLogP2.964 (est)EPA Substance Registry SystemL-Glutamic acid, N-(1-oxododecyl)- (3397-65-7)
Contate agora
 Products Description of Sodium perborate tetrahydrateCAS#10486-00-7 White monoclinic crystalline particles or powder. Melting point 63℃. Soluble in acid, alkali and glycerol, slightly soluble in water, the solution is alkaline (pHl0~11), the aqueous solution is unstable and easily releases active oxygen. In cold and dry air, sodium perborate with higher purity is more stable. Decomposes at 40℃ or in humid air and releases oxygen. Dissolves in its own crystal water at 63℃ and decomposes to form a sticky solid mass. Loses 3 crystal waters at above 70℃ to form a monohydrate.
Contate agora
Products Description of Bromobenzene CAS#108-86-1Bromobenzene is an organic compound with the chemical formula C6H5Br. It is a colorless oily liquid with the smell of benzene. Insoluble in water, soluble in most organic solvents such as methanol, ether, acetone, etc.
Contate agora
Methylcyclohexane CAS#108-87-2Methylcyclohexane, an alkene, is a colorless liquid with a faint benzene-like odor. The smell thre-shold is 630 ppm (this is above the OEL). Molecularweight = 98.21; Specific gravity (H2O:1)= 0.77; Boilingpoint = 101℃; Freezing/Melting point= - 127℃; Vaporpressure= 37 mmHg at 20℃; Flash point= - 3.9℃ (cc),- 5.9℃ (oc); Autoignition temperature = 258℃. Explosivelimits: LEL= 1.2%; UEL = 6.7%.
Contate agora
Cyclohexanone CAS#108-94-1Cyclohexanone is a colorless, clear liquid with soil smell; its impure product seems as mild yellow color. It is miscible with numerous different solvents. without difficulty soluble in ethanol and ether. The decrease publicity restrict is 1.1% and the higher publicity restriction is 9.4%.
Contate agora
Products Description of Chlorobutanol CAS#57-15-8Colorless crystals. There are two types of crystals: containing half molecular crystal water and anhydrous. The melting point of the containing half molecular crystal water type is 78℃, slightly soluble in water (1:250), easily soluble in ethanol (1:1), glycerol (1:10), ether, chloroform and volatile oil. The melting point of the anhydrous type is 97℃, the boiling point is 167℃, and the 135℃ (32.7kPa).
Contate agora
Products Description of M-Phenylenediamine (m-PDA) CAS#108-45-2Meta-phenylenediamine is an important raw material for organic synthesis. It is mainly used as a dye intermediate to produce basic orange, basic brown G, direct sunfast black G and other dyes. It is also used as fur dye and epoxy resin. It is used as a curing agent, cement coagulant, mordant, color developer, etc.
Contate agora
Products Description of Furfural CAS#98-01-1Furfural is a colorless, transparent, oily liquid produced by hydrolysis and dehydration of pentosan in plant fiber raw materials. It is also called furan formaldehyde. It has a special aroma. Under light, heat, air oxidation and the action of inorganic acids, the color quickly changes to yellow-brown, and finally to dark brown. It is also easy to polymerize and become resinous. It should be stored away from light, deoxygenated and sealed.
Contate agora
Ethylene glycol CAS#107-21-1Ethylene glycol is the simplest aliphatic diol, with the chemical properties of alcohol, and can generate ethers, esters, or be oxidized to acids or aldehydes, and can also be condensed to ethers or replaced by halogens. It generally generates diesters when reacting with acyl chlorides or anhydrides.
Contate agora
Products Description of Piroctone Olamine CAS#68890-66-4The unique properties of piroctone ethanolamine salt are mainly manifested in:1. The anti-dandruff and anti-itching effects are better than similar products.2. The solubility and compounding properties are excellent, and no precipitation or stratification will occur when mixed with cosmetic raw materials.3. The anti-dandruff mechanism is unique, the irritation is extremely low, and it will not cause hair loss or hair breakage.
Contate agora
Products Description of Direct Triiron Tetraoxide CAS #1317-61-9Triiron tetroxide is obtained from its natural mineral magnetite. In the laboratory the compound may be prepared by adding sodium hydroxide solution to an aqueous solution of 1:2 molar mixture of ferrous and ferric salt. (i.e., 1 mol FeCl2 + 2 mol FeCl3).
Contate agora
Products Description of 4-Aminoisoquinoline CAS#23687-25-44-Aminoisoquinoline is a white powdery crystal.CAS No.
Contate agora
Products Description of N-ETHYLFORMAMIDE CAS#627-45-2Used for liquid crystal intermediates, LCD stripping agent raw materials, pharmaceutical intermediates, etc.N-ETHYLFORMAMIDE Chemical PropertiesMelting point -60.43°C (estimate)Boiling point 202-204 °Cdensity 0.950 g/mL at 20 °C(lit.)refractive index n20/D 1.432Fp 67°Cstorage temp. 2-8°Cform clear liquidpka16.49±0.23(Predicted)color Colorless to Light yellow to Light orangeBRN 1737860EPA Substance Registry SystemFormamide, N-ethyl- (627-45-2)Safety InformationSafety S
Contate agora
Products Description of N,N'-Ethylenebis(stearamide) CAS#110-30-5N,N'-(ethane-1,2-diyl)distearamide is a colorless to light yellow waxy solid. It has good thermal stability and low volatility.
Contate agora
Products Description of N,N-Dimethylaniline CAS#121-69-7N,N-Dimethylaniline (CAS#121-69-7) is an organic compound that presents as a yellow, oily liquid with an amine-like odor. It is characterized by its density of approximately 0.96 g/cm³, a boiling point of 193.5±0.0 °C at 760 mmHg, and a melting point in the range of 1.5-2.5 °C (literature value) .
Contate agora
4,4'-Methylenebis(N,N-diglycidylaniline) Chemical PropertiesBoiling point 619.3±35.0 °C(Predicted)density 1.15 g/mL at 25 °C(lit.)vapor pressure 0Pa at 24.85℃refractive index n20/D 1.601(lit.)Fp >230 °Fform clear liquidpka4.58±0.50(Predicted)color Light yellow to BrownWater Solubility 9.2mg/L at 20℃LogP2.12 at 22℃EPA Substance Registry SystemOxiranemethanamine, N,N'-(methylenedi-4,1-phenylene)bis[N-(oxiranylmethyl)- (28768-32-3)Safety InformationHazard Codes Xi,NRisk Statements 43-51/53Safety Statements 
Contate agora
Relate News
39771-34-1 Introduction4-Amino-2,6-dibromopyridine (CAS#39771-34-1) is a chemical compound that belongs to the pyridine family. It is a pale yellow crystalline solid that is soluble in water and organic solvents. This compound is widely used in the pharmaceutical and agrochemical industries due to its diverse biological activities.
Vitamin B2 is an essential nutrient for the human body, and it is an essential substance to form the surface of human tissues and organs.Vitamin B2 cannot be stored in the human body, but the human body needs it every day, so it must be supplemented from food every day.A slight deficiency of vitamin B2 will not feel anything in the body, but when it reaches a certain level, obvious symptoms will appearWhat type of nutrient is Vitamin B2?Vitamin B2 is a member of the vitamin B group. It is a water-soluble vitamin. After being absorbed by the human body, there is not much retention in the body.
Industrialization of TrehaloseTrehalose is a stable non-reducing disaccharide consisting of two glucose molecules with an α, α, 1, 1-glycosidic bond. Trehalose was originally extracted from the ergot fungus of rye and was subsequently found to be widespread in natural flora, fauna and microorganisms, especially in fungi, algae, mosses and invertebrates. Trehalose is white crystal, a molecule of trehalose contains two molecules of crystal water, soluble in water, glacial acetic acid and hot ethanol, insoluble in ether, acetone.
Collagen, (acmetea) repair factor is a macromolecular functional protein. It is the main component of the skin and accounts for 80% of the dermis of the skin. It forms a fine elastic network in the skin to firmly lock moisture and support the skin.Collagen is a high molecular functional protein. It is the main component of the skin and accounts for 80% of the dermis of the skin. It forms a fine elastic network in the skin, which firmly locks in moisture and supports the skin.
In fact, many people are familiar with glucose. This is a very helpful nutrient to the human body. It can effectively enhance the body’s immunity, improve the ability to resist viruses, maintain the balance of intestinal flora, and effectively delay skin aging. To achieve the effect of lowering cholesterol, but if excessive intake can also lead to increased blood sugar.Glucose is a kind of monosaccharide that widely exists in nature. There are many functions and functions of glucose.
Recent News Summary on AntioxidantsHealth and Disease Mechanisms: A comprehensive understanding of the mechanisms of antioxidant action in health and disease has been discussed in a recent study, highlighting the role of oxidative stress in various human diseases and the potential of antioxidants as therapeutic agents .Advances in Antioxidant Research: Recent developments in the field of antioxidants have focused on the structure and antioxidant properties of various compounds.
Camphor oil is one of the coloring oils used in glaze colors. Made from camphor resin. Light yellow, volatile, with a strong camphor smell. “Ceramic Color Painting”: “Use it to expand the color when painting new colors, it is easy to develop the oil, the brush is loose, and it dries quickly after painting. Pastel is rarely used, only used for freehand color expansion. Sometimes It is also used to develop dry pens, or to wipe off the residue that has consolidated in the dish, or to wipe off the dried waste line on the screen.
Introduction of Capsaicin PepperThe spicy ingredients contained in pepper fruit are capsaicin pepperoids, including: capsaicin pepper, dihydrocapsaicin pepper, nordihydrocapsaicin pepper, homocapsaicin pepper, homodihydrocapsaicin pepper I, homodihydrocapsaicin pepper II, Nonoyl vanillylamide, Decoyl vanillylamide, Capryl vanillylamide. Capsanthin includes Cryptoxanthin, Capsanthin, Capsorubin, Carotene; also contains vitamin C, citric acid, tartaric acid, malic acid, protein, minerals, etc. .
The Introduction of DMAPDMAP is a well-known organic compound with the molecular formula C7H10N2. It is a white solid with a strong odor and is soluble in water, ethanol, and ether. DMAP is a widely used catalyst in organic synthesis due to its high reactivity and selectivity. In this article, we will discuss the properties, uses, and applications of DMAP in the chemical industry.The Properties and Uses of DMAPDMAP is a highly reactive catalyst that is commonly used in organic synthesis.
Pectin is a sort of all-natural polymer substance, which generally exists in all greater plants as well as is an important component of plant intercellular compound. Pectin is transferred in the key cell wall as well as intercellular layer, and cross-links with various components of cellulose, hemicellulose, lignin microfibrils as well as some extensin in the primary wall to make various cell cells frameworks Difficult, exhibiting an intrinsic shape, and also a supporting material for internal cells.
x

submetido com sucesso

Entraremos em contato com você o mais breve possível

Fechar